PrintResizePrintResize
Standard Placemat Size: Pick the Right One (cm, in, Pixels)

Standard Placemat Size: Pick the Right One (cm, in, Pixels)

PrintResize

Standard placemat size is 12 × 18 in (30 × 46 cm). Get the right size for rectangle, oval, square and round mats, plus the exact pixels to print yours sharp.

The standard placemat is 12 × 18 inches (about 30 × 46 cm). Most dining tables in the US are set with it, and most placemat size charts stop there. If you are printing your own design, you need one more number: how many pixels that 12 × 18 inch mat needs so the print comes out sharp.

This chart gives both. First the common sizes for every shape, in inches and centimetres, then the pixel size of each one at the resolution fabric prints at. A placemat is small enough that the photo you already have often covers it, which is rarely true of a tablecloth.

Already have a design? Placemat Mockup shows it on a set table before you order, and Print Resize sets it to the exact placemat size.

Standard placemat dimensions

ShapeCommon sizeIn cmTypical use
Rectangle (standard)12″ × 18″30.5 × 45.7Everyday meals, most tables
Rectangle (small)12″ × 16″30.5 × 40.6Small tables, children
Rectangle (large)14″ × 18″ to 14″ × 20″35.6 × 45.7 to 35.6 × 50.8Formal settings, 11-inch plates
Oval13″ × 19″33 × 48.3Round and oval tables
Square13″ × 13″ or 14″ × 14″33 or 35.6Square tables, smaller plates
Round12″ to 16″ across30.5 to 40.6Round and bistro tables
Metric rectangle30 × 45 cm11.8″ × 17.7″The common size outside the US

Two checks decide which row fits your table:

  • The plate fits with room to spare. Dinner plates run about 10 to 11 inches. Pick a mat at least an inch or two wider than the plate on each side: 12 × 18 suits a 10-inch plate, 14 × 20 suits an 11-inch one.
  • The settings fit along the table. Add up the long sides of the mats you plan to put along one side of the table, then leave a few inches between neighbours. Three 18-inch mats along a 72-inch table use 54 inches, which leaves 18 inches for the gaps and the ends.

Placemat size in pixels for printing

Fabric printing usually runs at 150 DPI, with 300 DPI for premium short runs and artwork with fine lines or small text. Placemats are seen up close, at arm's length across a plate, so if your design has lettering or thin linework, plan for 300. Pixels needed = inches × DPI.

PlacematcmPixels at 150 DPIPixels at 300 DPI
12″ × 18″30.5 × 45.71,800 × 2,7003,600 × 5,400
12″ × 16″30.5 × 40.61,800 × 2,4003,600 × 4,800
14″ × 18″35.6 × 45.72,100 × 2,7004,200 × 5,400
14″ × 20″35.6 × 50.82,100 × 3,0004,200 × 6,000
13″ × 19″ oval33 × 48.31,950 × 2,8503,900 × 5,700
13″ square33 × 331,950 × 1,9503,900 × 3,900
14″ square35.6 × 35.62,100 × 2,1004,200 × 4,200
15″ round38.1 ⌀2,250 × 2,2504,500 × 4,500
30 × 45 cm11.8″ × 17.7″1,772 × 2,6583,543 × 5,315

Compare that with what you probably have. A 12 MP phone photo is about 4,000 × 3,000 px. At 150 DPI that covers a standard 12 × 18 mat with room to crop. At 300 DPI it covers about 13 × 10 inches, so it falls short of the full mat. A 1024 × 1024 AI image is a different story: on a 14-inch square mat it works out to about 73 DPI, and that will look soft on fabric.

Ovals and rounds usually print from a rectangular file with the shape set by a cut line, so build the file at the full width and height and ask your printer whether they want a cut line or a template.

Table mat dimensions: two different things

"Table mat" means two products, and the sizes are nothing alike:

  • A table mat as a placemat. One per diner, the same sizes as the chart above.
  • A full-table mat. One mat covering most of the tabletop, common on oval dining tables. These run around a metre or more. The oval shapes in Print Resize are this kind: 19 fixed sizes from 105 × 65 cm to 180 × 100 cm, each with straight sides and rounded ends.

If a supplier lists a "table mat" at 30 × 45 cm, it is a placemat. At 135 × 81 cm, it covers the table.

Getting your design to placemat size

  1. Check the number first. The free DPI Checker shows the effective DPI of your file at any print size, and the Print Size Calculator converts any row of this chart. You know the gap before you fix anything.
  2. Rebuild at the exact size. Print Resize takes the target in centimetres, up to 240 cm per side, so every placemat in this chart fits. It rebuilds the image for that size, fills any missing area for the new ratio, and writes the physical size into the file. The credit cost shows before it runs.
  3. Add pixels if you are short. AI Upscale takes an image to 2K, 4K or 8K. 4K is about 4,096 px on the long edge, which is roughly 228 DPI across an 18-inch mat. 2K, at about 2,048 px, gives roughly 114 DPI on the same mat, below the 150 working standard.

Before you order a set, it helps to see the design on a table. Placemat Mockup puts your pattern on a set table in 10 shapes, including rectangle, oval, round and square, so you can judge how the scale reads next to a plate.

Keep important artwork 1 to 2 cm inside the edge. Sewn placemats lose some of that to the hem, and printers can't always hold ink right at the border.

FAQ

What is the standard size of a placemat?

12 × 18 inches, or about 30 × 46 cm. Outside the US, 30 × 45 cm is the common metric size.

What size placemat for a round table?

A round placemat between 12 and 16 inches across, or a 13 × 19 inch oval.

How big is a large placemat?

14 × 20 inches (35.6 × 50.8 cm). It suits formal settings and 11-inch dinner plates.

What size is a square placemat?

13 or 14 inches square (33 or 35.6 cm).

How many pixels does a placemat print need?

Inches × DPI. A 12 × 18 inch mat needs 1,800 × 2,700 px at 150 DPI and 3,600 × 5,400 px at 300 DPI.

What DPI should a placemat file be?

150 DPI is the working standard for fabric. Go to 300 DPI for fine lines and small text, since people look at a placemat from close up. Above 300 adds nothing visible on fabric. If your file says 300 DPI and still looks blurry at size, this explains why.

Do placemats and a table runner go together?

Yes, if the runner runs down the middle and the mats sit along the sides. The table runner size chart has the runner widths and lengths.

From chart to print file

Pick your row, type the size in centimetres into Print Resize, and the file comes back at that placemat size with the DPI written in. The free checks show what you are starting from before you spend any credits.

Further reading How to Prepare a Print File for Fabric (Checklist) · Upscale Image for Printing: Fix the Blur Before It Prints · 300 DPI and Still Blurry? Why It Happens and How to Fix It · How to Create Seamless Patterns for Print

Recommended tool

Print Resize

Resize an image for printing on fabric, from 10 to 240 cm per side. Print Resize rebuilds the image for that exact size, and the credit cost is shown before it runs.

Open Print Resize